top of page

Welcome to our GPS tracking online shop!  Our top brands offer a wide variety of options and technologies. Browse and shop by brand to find the perfect system for your needs.

GEOTAB - MODEM SATELLITE IRIDIUM - IOX-SATIRDv2

C$1 299.00
In stock
Product Details

For the most up-to-date version of this document, visit: goo.gl/MHteCI

Iridium satellite

If a vehicle is in an area with no cellular or network connection, the Iridium® Satellite Modem allows the Geotab® GO™ device to communicate over the Iridium Network. With the Iridium Satellite Modem, users can continue to track their fleet even when cellular connectivity is lost.

! IMPORTANT: Partner preplanning: If installation takes place in an area of no or poor cellular coverage, the Partner must power up the Geotab GO device and all IOX accessories (IOX-SATIRDv2) in an area of good cellular connectivity and sequence ignition to ensure the firmware is up-to-date on all devices.

Alert button notification

The IOX-SATIRDv2 allows the driver to send a top priority Emergency message through the satellite network to MyGeotab® by pressing an alert button (not included). For more information, refer to step 8 of the installation instructions.

Technical specifications and features

Weight

70 g

Size

Overall Length: 1810 mm

Widest Point: 31 mm W × 16 mm H

Housing

PC+ABS clamshell casing

Interfaces

CAN: 500 kbps (for daisy chaining)

RS-232 serial interface

Inputs

Emergency Switch Wire: Open — shorted to ground

Nominal Input Voltage

12 V / 24 V

Power Output

Iridium Interface: 900 mA @ 12 V/24 V

Current Draw IOX-SATIRDv2

on GOx daisy chain

40 mA at 12 V / 24 V Operating mode (typical/nominal current draw)

100 mA at 12 V / 24 V Operating mode (max. current draw)

0.4 mA at 12 V / 24 V Sleep mode (min. current draw)

Temperature Rating

−40 ℃ to +85 ℃

Connectors

Iridium Satellite Antenna Connector: SMA male plug

Iridium Satellite Modem Connector: SMA female jack

Male Mini-USB Type-B Connector: Daisy chain power and CAN in

Female Mini-USB Type-B Connector: Daisy chain power and CAN out

Molex 12-pin Connector 43025-1200: Iridium modem

1: Brown - GND

2: White - DTR

4: Green - RX

6: Red - PWR

8: Yellow - TX

Molex Female Terminal 43030-0001

Installation

  1. Male Mini-USB connector connects to GO device or another IOX.
  2. 12-pin plug connects to Iridium unit.
  3. Blue/black wires can be connected to an emergency alert button switch.

Compatible Devices

All GO7® and newer devices and variants

GO9 can source a maximum total current to the IOX in Daisy Chain

2500 mA at 12 V/24 V

✱ NOTE: For each IOX in the Daisy Chain, add the Max Current draw, and do not exceed the Max. Total IOX Current draw.


Save this product for later
Have questions?
GEOTAB - MODEM SATELLITE IRIDIUM - IOX-SATIRDv2
bottom of page